We offer a wide range of tee grid suspension system, which
is used to suspend GRG ceiling tiles to the ceiling. These have passed
ASTM standard and is manufactured on the latest technology advance
machines to ensure high quality. Further, our products are available in
the following dimensions:
Tee grid: Main runner 3600mm
Cross tee 600mm
Wall angle 3000mm
Sizes: 15mm
Material: Hot dipped galvanized steel with 120 GSM coating
Finish: Coil coated
Metacil Tee Grid is tested with salt spray test for 300hrs to ensure
rust and corrosion free ceiling with long life and high durability and
tensile strength.
Some of the features of our products are as follows:
Fire Resistant: Our products are incorporated with fire
norches to sustain ceiling at the time of fire. This fire notches have
space to extend at the time of fire.
Load bearing demands of various ceiling systems and particular project requirement.
Installation advantage: The unique locking system
between cross tee allows different patterns interchangeability allowing
maintenance of less inventory.
Providing and fixing of Metacil 15mm/8mm Grg(glass reinforced
gypsum)tile of 595*595mm with RH 95% and having the NRC Value at 0.4
with thermal conductivity of 0.45with 75% light reflection along with T
Grid suspension system ie Main Runner 3600mm with 24mm*33mm*0.25thick.
cross runner 1200/600 mm having the size 24mm*25mm*0.25mm and wall angle
should be 24mm*19mm*0.4thick
DESCRIPTION
Composition
The tiles are manufactured from GRG (glass reinforced gypsum) and
comprise non-combustible gypsum casting plaster reinforced with a
glassfibre membrane resulting in a lightweight, strong, naturally
prestressed panel.
Surface finish
The plaster has a moulded fine, smooth or textured finish and may be supplied pre-decorated to order or with a natural finish.
Dimensional tolerance plus or minus 0.5mm.
Specials
Sizes:
Tiles are of standard size of 600x600 on coverage basis and actual size is 595x595mm.
Designs:
The tiles are available in 10 designs ,
Performance:
High performance tiles can be designed for the most demanding
applications where special environmental requirements are called for.
Physical Data :
Material :
Glass Reinforced Gypsum
Surface :
Smooth, Woodengrain (available with factory applied Stain)
Edge : Tegular
Advantage, Durable, Non Combustible, Superior thermal, Asbestos
Free, Don’t wrap, sag shrink, Excellent Light Reflectance, Good Acoustic
Properties, Perfect Design and Finsih, Repaintable, Easy to install and
clean
Metacil ceiling System
Advantage of Gypsum Board
Ease of installation : Gypsum board building system are easy to install for several reasons. Gypsum board panels
are relatively large compared to other materials. They come in 48- and
54- inch wide sheets and in lengths of 9, 10, 12 feet, so they quickly
cover large wall and ceiling areas. Gypsum board assemblies require only
a few tools for their construction. Gypsum board can be cut with eitherr a utility knife or a variety of saws, and it can be attached with a variety of fasteners, including screws, nails and staples.
Fire resistance :
Gypsum board is an excellent fire-resistive building material. It is the most commonly used interior finish
where fire resistance classifications are required. Its noncombustible
core contains nearly 21% chemically combined water, as described
earlier, which, under high heart, is slowly released as steam. Because
steam will not exceed 212 digress F under normal atmospheric pressure,
it very effectively retards the transfer of heat and the spread of fire. Even after complete calcination, when
all the water has been released from its core, gypsum board continues to save as a heat-insulation barrier.
Sound isolation :
Preventing the transfer of unwanted sound to adjoining areas is a key consideration when designing
a building, specifically when taking into account the intended
activities of the occupants in the various parts of the building.
Durability :
Gypsum board is used to construct strong, high quality walls and ceilings that offer excellent dimensional stability and durability. surfaces created using gypsum board are easily decorated and refinished.
Economy :
Gypsum board is readily available and easy to apply. It is an inexpensive wall surfacing material that provides a fire resistance interior finish. Gypsum board building systems can generally be installed at significantly lower labor costs that most alternative systems.
Versatility :
Gypsum board satisfies a wide range of architectural
requirements for design. Ease of application, performance, ease of
repair, availability, and its adaptability to all forms of decoration
combine to make gypsum board unmatched by any other surfacing product.
Gypsum Board
Providing and fixing at all height falls ceiling including
providing and fixing of frame work made of special sections power
pressed from MS sheet and galvanized in accordance with zinc coating as per IS:277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 22mm and 37 mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25x25x.55mm of required length, and other angle of hanger being fixed with star
screw to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre
to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm
with tapered flanges of 26mm each having clips of 10.5mm at 450mm
centre to centre shall be fixed in a direction perpendicular to G.I.
channel with connecting clips made out of 2.64mm diax230mm long G.I.
wire at every junction including fixing the gypsum board with ceiling
section and perimeter channels 0.5mm thick 27mm high having flanges of
20mm and 30mm long, the perimeter of ceiling fixed the wall/ partition
with the help of rawl plugs at 450mm centre to centre with 25mm long
drive-all screw @ 230mm interval including jointing and fixing to a
flush finish of tapered and square edges of the board with recommended
filler, jointing tapes, finisher and two coats of primer suitable for
board as per manufactures specification and also including the cost of
making openings for light fittings, grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed all complete as per drawing
and specification.
Gypsum Board Partition)
Providing and fixing Partition having composite thickness
75mm consisting of frame and double skin 12.5mm thick Gypsum Board,which
including, providing and fixing of frame work made of special section
power pressed from MS sheet and galvanized with zinc coating of grade
175 and consisting of floor and ceiling channel 50mm wide having equal
flanges of 32mm width 0.5mm thick fixed to floor and ceiling at the
spacing of 610mm centre to centre with dash fastener of approved make of
12.5mm dia 40mm length and the studs 48mm wide having one flange of
34mm and other flange of 36mm and 0.5mm thick and fixed vertically
within the flanges of floor and ceiling channel and placed at a spacing
of 610mm c/c by star screw at both ends of partition fixed flushed to
wall with star screw at the spacing of 450mm c/c with horizontal runners
48mm wide having one flange of 34mm and other flange of 36mm and 0.5mm
thick @1220 c/c fixed to vertical studs using 25mm dry wall screws and
fixing to Gypsum Board either side of the frame work by 25mm long dry
wall screws on studs, floor and ceiling at the spacing of 300mm c/c
including two coats of primer, suitable
for boards as per as per Gypsum Board specification
www.mascotgroup.com
For best service : +91 999 9333 256
Welcome to Mascot Group
METACIL (ISO 9001:2000) are well known professional in manufacturing, marketing and selling gypsum board,
metal false ceiling systems and GRG false systems. With a production
center equipped with modern facilities, METACIL has been successfully
satisfying Indian customers for over 15 years. Now stepping its foot in
international market METACIL has its head office at Noida and Metal
Ceiling Factory/Gypsum board plant at Nand Nagar Industrial Area,
Kashipur, Uttrakhand. METACIL has honored its promise of continuous
advancement in technology; range of products and to deliver superior
products at competitive pricing. Under the support of 15 years
experience in industry and backed by team of new generation
perfectionist and continuous investment in machineries with advance
technology. With great ambition and keen global vision, we will continue
to be bold in innovation and actively explore market with aim to become
the most splendid pearl in domestic and foreign building material
industry. More...
-
Gypsum Board
Gypsum board building system are easy to install for several reasons. Gypsum board panels are
relatively large compared to other materials.. More »
-
Metal False Ceiling
Metacil ceiling system has more choices and better configuration than ordinary ceiling. Professional decoration projects, More »
-
GRG Ceiling Tiles
This is personal idea of art space. Plane can not be dispatched from space, art can not be
stayed away from life. More »
-
Metal Building System
Pre-engineered metal building system is widely accepted across the globe as an efficient alternative to conventional buildings. More »
-
UPVC Window & Door
Everything that you want of your windows and doors, METACIL has it. Today, METACIL is a market leader and a pioneer in manufacturing. More »
Factory: